Panel furniture refers to disassembled modular furniture with wood-based panels as the main substrate and panel as the basic structure. Common artificial boards include plywood, blockboard, particle board, and MDF. Plywood (plywood) is often used to make furniture that requires bending and deformation; the performance of blockboard is sometimes affected by the core material; particleboard (also known as particle board, bagasse board) is loose and only used for low-grade furniture. The most cost-effective, most commonly used is medium density fiberboard (MDF). The common finishing materials for panel furniture are thin wood (commonly known as veneer), wood grain paper (commonly known as sticker), PVC rubber sheet, polyester paint surface (commonly known as baking paint). Common artificial boards include fragrant boards, plywood, blockboard, particle board, and MDF.
1. Advantages of panel furniture Fully effective use of wood disassembly and assembly, convenient production cycle, stable shape, stable shape, and not easy to be deformed
2. 面板家具的缺点
(1) Bayo pa enviyonmanlye pou kontinye avèk byen byen. Pou gen plis benefis, kèk makèt produi kòlèt lòt materyèl tankou brikèt, epi lè yon lòt bagay ki fèt avèk lòt, lè yon lòt tout kouvri avèk lòt nan mezbè, li fèt lè li reyisi fòmalde ki dòmi pou moun, ki pa yon bagay ki byen pou enviyonmanlye.
(2) non-natural Lè ki pi gwo difans antre materyèl yo itilize pou mebyen panèl ak materyèl nan mebyen solyè kwi se nan natirèlès nan materyèl. Plizyè nan mebyen panèl nan jodi a se desin vénè, ki gen patwon retye epi gen mank natirèlès nan materyèl natirèl.
3. Cleaning and maintenance of panel furniture
a. Place it smoothly The floor of the panel furniture must be kept flat and the four legs balanced. If the furniture is placed in a state of frequent swaying and unstable after being placed, the hoe or the fastener will fall off and the bonding part will be cracked, which will affect the use effect and reduce the life of the furniture. In addition, if the ground is soft and the furniture is unbalanced, do not use wooden boards or iron sheets to cushion the furniture legs. Even if it is balanced, it will be difficult to evenly distribute the force.If it will last for a long time, it will damage the internal structure of the furniture. The only way to compensate is to trim the floor, or use it slightly. A large area of hard rubber sheet is laid on the south side to make the furniture legs stand smoothly.
b. 移除灰尘 最好使用棉质针织布来清除家具上的灰尘，然后用软毛刷去除浮雕或压花的灰尘。油漆过的家具不应使用汽油或有机溶剂擦拭。可以用无色家具清漆擦拭以增强光泽并减少灰尘。
c. Avoiding the sun It is best not to be exposed to direct sunlight in the position of the furniture. Frequent sun exposure will fade the furniture paint film, metal parts will be easily oxidized and deteriorated, and the wood will be brittle. Summer is best to cover the sun with curtains to protect the furniture.
d. Humidité intérieure Juste garder l'humidité intérieure et ne laissez pas le mobilier se mouiller. Pendant les printemps et les automnes, l'humidificateur doit être utilisé pour limiter le temps afin d'éviter que le mobilier ne soit endommagé par une humidité excessive, comme la pourriture du bois, la rouille des parties métalliques et l'ouverture facile des parties adhésives.
Usually, wash the furniture as little as possible, and avoid using alkaline water. It should only be wiped with a damp cloth with water and then wiped clean with a dry cloth.
